Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the Correct Procedure to Reset the Service Light on a 2008 Peugeot 308 1.6 HDi?

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Service warning light

The tasks performed in this video guide include changing the engine oil, oil filter, fuel filter, pollen filter, and finally the air filter. After completing these, proceed to the second phase, which is the reset of the service light: press and hold the button to the left of the rev counter, turn on the ignition, and after ten seconds, you will see the countdown on the onboard computer, and the spanner light will reset. Now turn off the ignition and turn it back on, ensuring that no warning lights are active.

Posted on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Temperature Sensor on Peugeot 308 HDI
Replacing Temperature Sensor on Peugeot 308 HDI
Peugeot 308 (2007-2014 / T7, MK 1) In this video tutorial, you will learn how to remove the temperature sensor from a Peugeot 308 HDI. The temperature sensor is a crucial component tha…
How to Reset the AdBlue Warning Light on the Peugeot 308
How to Reset the AdBlue Warning Light on the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) This guide provides the main instructions to reset the AdBlue warning light on the Peugeot 308. Before resetting the light, ensure you have topped up…
Service Reset on a Peugeot 308 SW
Service Reset on a Peugeot 308 SW
Peugeot 308 (2013-2021 / T9, MK 2) In this very short video today, we can see how to reset the service light on a Peugeot 308 SW, second generation model produced from 2013 to 2021. So…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos