Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Locate and Understand the Fuse Assignment Diagrams in a Chevrolet Traverse

Model: Chevrolet Traverse MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017

See other generations:
Video tutorial

Locating the fuse boxes in a Chevrolet Traverse is a fairly simple task. You can easily find the first fuse panel by removing the glove compartment on the passenger side, inside the vehicle's cabin.

This panel contains fuses assigned to: airbags, amplifier, door locks, BCM, fog lights, display, ventilation and air conditioning system, parking sensors, radio, etc. The next box is located by opening the hood, and you can find it on the left side of the engine compartment.

This box contains: cigarette lighter, ECM, battery, fuel injectors, fuel pump, coolant system, humidity sensor, horn, brake lights, starting system, brake lights, etc.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of the Chevrolet Traverse 2
How to Replace the Key Battery of the Chevrolet Traverse 2
Chevrolet Traverse (2018-2025 / MK 2) This guide describes the entire procedure you need to follow to replace the small battery located inside the key of your second-generation Chevrolet …
How to Replace the Air Filter in a Chevrolet Traverse
How to Replace the Air Filter in a Chevrolet Traverse
Chevrolet Traverse (2018-2025 / MK 2) In today's video, you will see a very simple maintenance operation that can be easily performed in your garage. You will learn how to replace the air…
How do you reset the tire pressure light on the Chevrolet Traverse?
How do you reset the tire pressure light on the Chevrolet Traverse?
Chevrolet Traverse (2009-2017 / MK 1) To reset the tire pressure light on the Chevrolet Traverse, you need to inflate the tires to the recommended pressure value: this value will be indic…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos