Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : Instrument cluster

Hyundai Santa Fe - Instrument cluster

Hyundai Santa Fe (2012-2018 / MK 3)
How to reset the service indicator on the 2017 Hyundai Santa Fe.
If you don't know the steps to follow in order to independently complete the manual reset of the service light that appears on the instrument panel of your …read all…
Posted on 16 November 2023 by ScegliAuto
Hyundai Santa Fe (2012-2018 / MK 3)
How to reset the service on the Hyundai Santa Fe
If we have replaced the engine oil and its filter on this car, we must then complete the work by resetting the service light that came on on the instrument …read all…
Posted on 14 June 2022 by ScegliAuto
Alternator (3) Loudspeaker (1) Shock absorbers (7) Air conditioning (2) Car stereo (3) Anti roll bar (1) Battery (4) Coil (1) Arm (5) Spark plugs (3) Glow plugs (1) Key (6) Timing belt (7) Air conditioning (1) -board computer (6) Checks and maintenance (17) Dashboard (3) Bearing (1) Brake discs (3) Headlight (7) Tail light (1) Air filter (4) Cabin air filter (11) Diesel filter (3) Oil filter (2) Window lift switch (2) Accessory Kit (2) Light bulb (1) Headlight bulb (2) Rear light bulb (1) Interior lights ceiling light bulb (1) Dashboard light (2) License plate light (2) Handle (1) Engine (7) Starter motor (1) Gear oil (5) Brake oil (1) Engine oil (7) Door panel (1) Front bumper (1) Rear bumper (1) Brake pads (5) Hydraulic pistons (1) Fuel pump (2) Instrument cluster (2) Radiator (3) Wheel (1) Fuse box (5) Seat (1) Crankshaft RPM sensor (3) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (4) Valve (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos