Do it yourself
Frequently asked questions about cars and motorcycles

How to Locate the Fuse Boxes and Their Assignments in a Suzuki Kizashi

Model: Suzuki Kizashi MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016

This video is currently unavailable

This video shows the diagram related to the fuse assignments in a Suzuki Kizashi. The first fuse box is located under the dashboard on the driver's side and contains fuses for: windscreen washer motor, seat heating, windscreen wiper motor, rain and light sensor, rear demister relay, starting module, ESP, brake light switch, cruise control, BCM, parking sensors, airbag, audio and navigation system, etc. In the passenger compartment, there is a second fuse box on the passenger side containing fuses for: rear window, window switch, windscreen motor, battery fan, electronic seat control, lumbar support switch, etc. Finally, the third fuse box is found in the engine bay and contains fuses for: fan motor relay, starter motor relay, radiator fan, high and low beam, rear demister, horn, fuel pump, engine ignition, windscreen wiper, air conditioning compressor, etc.


Updated on 27 July 2026 by ScegliAuto


Related tutorials

Suzuki Kizashi (2010-2016 / MK 1) The fuses in the Suzuki Kizashi are housed within specific boxes installed in the vehicle. This type of car has three fuse boxes. The first is locate…
Suzuki Kizashi (2010-2016 / MK 1) In this new guide, we will help you find the fuse box inside your Suzuki Kizashi in just a few seconds. All you have to do is go inside the vehicle a…
Suzuki Kizashi (2010-2016 / MK 1) This guide outlines the steps necessary to remove and replace the front seat of the Suzuki Kizashi, as well as the Maruti Kizashi. First, open the fr…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos