Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Speaker

Peugeot 206 - Speaker

Speaker Peugeot 206 (1998-2012 / mk 1)

Peugeot 206 (1998-2012 / MK 1)
How to Change the Speakers in a Peugeot 206
To replace the front speakers in a Peugeot 206, you need to remove the inner door panel. Turn off the radio, then remove the screws securing the panel, …Read all…
Posted on 31 August 2026 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the speakers of the Peugeot 206
How do you replace the speakers of a Peugeot 206? We see it in this video. In the video it is not described, but we must first remove the internal door panel: …Read all…
Posted on 13 April 2025 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to Replace the Front Speakers in a Peugeot 206?
Replacing the front speakers in a Peugeot 206 is an extremely simple and quick operation. First, ensure the key is not in the ignition, then open the relevant …Read all…
Posted on 6 September 2026 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the speaker in the Peugeot 206
In this video, see how to replace the speakers in your Peugeot 206. The speakers are located in the door, behind the appropriate cover. To replace the …Read all…
Posted on 15 August 2026 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to Replace the Speakers on a Peugeot 206
To replace the speaker on a Peugeot 206, remove the corresponding door panel to access the underlying components. To remove the panel, unscrew its securing …Read all…
Posted on 14 August 2026 by ScegliAuto
Cigarette lighter (2) Airbag (9) Alternator (10) Speaker (5) Shocks (3) Antenna (5) Air conditioning (2) Car stereo (11) Anti-roll bar (2) Roof rack bars (1) Battery (17) Ignition coil (3) Air vents (4) Bushings (1) Control arm (2) Transmission (10) Spark plugs (7) Glow plugs (2) Convertible top (7) Carburetor (1) Body (8) Control unit (2) Key (26) Trunk lock (1) Timing belt (22) V-belt (6) Air conditioner (2) A/C controls (5) Onboard computer (10) Checks and maintenance (56) Dashboard (3) Shifter boot (2) Bearing (2) Brake rotors (2) Side marker light (1) Headlight (24) Tail light (6) Fog lights (6) Air filter (16) Cabin air filter (8) Fuel filter (5) Diesel fuel filter (11) Oil filter (9) Parking brake (3) Clutch (10) Grille (1) Fuel injectors (7) Reverse light switch (1) Accessory kit (1) Light bulb (7) Side marker bulb (1) Headlight bulb (24) Tail light bulb (12) Interior dome light bulb (6) Antifreeze coolant (2) Instrument panel light (15) License plate light (4) (1) Handle (1) Exhaust muffler (1) Trim cover (1) Engine (1) Power window motor (1) Starter motor (10) Transmission fluid (4) Brake fluid (1) Engine oil (9) Clock (17) Door trim panel (28) Front bumper (5) Rear bumper (4) Brake pads (4) Hydraulic pistons (1) Tires (2) Shift knob (14) Pump (8) Fuel pump (14) Car door (7) Push button (2) Power window switch (4) Instrument cluster (10) Radiator (6) Heater core (8) Wheel (4) Fuse box (58) Seat (14) Axle shaft (1) Crankshaft position sensor (1) Engine coolant temperature sensor (4) Parking sensors (1) Door lock (3) Brake system (1) Suspension system (3) Side mirror (16) Rearview mirror (3) Warning light – error code (16) Service warning light (38) Windshield wipers (3) Thermostat (2) Cylinder head (5) Tie rods (2) Center console tunnel (2) Valve (2) EGR valve (1) Blower motor (7) Side window (1) Steering wheel (6)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos