Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 206
  6. : Tie rods

Peugeot 206 - Tie rods

Tie Rods Peugeot 206 (1998-2012 / mk 1)

Peugeot 206 (1998-2012 / MK 1)
Replacement of the steering tie rods on the Peugeot 206

In this guide, you will find instructions on how to dismantle and replace the steering tie rods on the Peugeot 206 in simple steps. First, lift the vehicle and …Read all…
Posted on 13 September 2026 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Dismantling the Universal Joint of the Steering Column

The connecting shaft of the steering column to the steering box has a very important safety function: it is telescopic and absorbs deformations of the cabin in …Read all…
Posted on 19 February 2026 by ScegliAuto

Cigarette lighter (2) Airbag (9) Alternator (10) Speaker (5) Shocks (3) Antenna (5) Air conditioning (2) Car stereo (11) Anti-roll bar (2) Roof rack bars (1) Battery (17) Ignition coil (3) Air vents (4) Bushings (1) Control arm (2) Transmission (10) Spark plugs (7) Glow plugs (2) Convertible top (7) Carburetor (1) Body (8) Control unit (2) Key (26) Trunk lock (1) Timing belt (22) V-belt (6) Air conditioner (2) A/C controls (5) Onboard computer (10) Checks and maintenance (56) Dashboard (3) Shifter boot (2) Bearing (2) Brake rotors (2) Side marker light (1) Headlight (24) Tail light (6) Fog lights (6) Air filter (16) Cabin air filter (8) Fuel filter (5) Diesel fuel filter (11) Oil filter (9) Parking brake (3) Clutch (10) Grille (1) Fuel injectors (7) Reverse light switch (1) Accessory kit (1) Light bulb (7) Side marker bulb (1) Headlight bulb (24) Tail light bulb (12) Interior dome light bulb (6) Antifreeze coolant (2) Instrument panel light (15) License plate light (4) (1) Handle (1) Exhaust muffler (1) Trim cover (1) Engine (1) Power window motor (1) Starter motor (10) Transmission fluid (4) Brake fluid (1) Engine oil (9) Clock (17) Door trim panel (28) Front bumper (5) Rear bumper (4) Brake pads (4) Hydraulic pistons (1) Tires (2) Shift knob (14) Pump (8) Fuel pump (14) Car door (7) Push button (2) Power window switch (4) Instrument cluster (10) Radiator (6) Heater core (8) Wheel (4) Fuse box (58) Seat (14) Axle shaft (1) Crankshaft position sensor (1) Engine coolant temperature sensor (4) Parking sensors (1) Door lock (3) Brake system (1) Suspension system (3) Side mirror (16) Rearview mirror (3) Warning light – error code (16) Service warning light (38) Windshield wipers (3) Thermostat (2) Cylinder head (5) Tie rods (2) Center console tunnel (2) Valve (2) EGR valve (1) Blower motor (7) Side window (1) Steering wheel (6)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos