Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 206
  6. : Steering wheel

Peugeot 206 - Steering wheel

Steering Wheel Peugeot 206 (1998-2012 / mk 1)

Peugeot 206 (1998-2012 / MK 1)
How to disassemble the steering wheel of the Peugeot 206

In this guide, we will see the instructions that will allow us to disassemble and replace the steering wheel of the Peugeot 206. First, we get into the car and …Read all…
Posted on 12 March 2025 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Removing the Steering Wheel and Airbag on a Peugeot 206

For safety, disconnect the battery. At the back of the steering wheel, there is a slot where you can work using a small flat-head screwdriver: by doing this, …Read all…
Posted on 4 May 2026 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to Remove the Steering Wheel from a Peugeot 206

Do you want to remove the steering wheel with the airbag from your Peugeot 206? Here’s how to detach the airbag from the steering wheel and then the steering …Read all…
Posted on 25 April 2026 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to Remove the Stalk Switch on a Peugeot 206

How to remove the stalk switch from a Peugeot 206? Let's see how to proceed with the disassembly. Before removing the car's steering wheel, disconnect the …Read all…
Posted on 25 March 2026 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Steering Column Joint Disassembly

The steering wheel is connected to the steering box via a shaft (usually telescopic) equipped with two universal joints at either end. To disassemble it, first …Read all…
Posted on 22 February 2026 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Replacement of Light Switch Controls

Before proceeding with the removal of the steering wheel, disconnect the battery to avoid the activation of warning lights. Locate the holes behind the spokes …Read all…
Posted on 12 February 2026 by ScegliAuto

Cigarette lighter (2) Airbag (9) Alternator (10) Speaker (5) Shocks (3) Antenna (5) Air conditioning (2) Car stereo (11) Anti-roll bar (2) Roof rack bars (1) Battery (17) Ignition coil (3) Air vents (4) Bushings (1) Control arm (2) Transmission (10) Spark plugs (7) Glow plugs (2) Convertible top (7) Carburetor (1) Body (8) Control unit (2) Key (26) Trunk lock (1) Timing belt (22) V-belt (6) Air conditioner (2) A/C controls (5) Onboard computer (10) Checks and maintenance (56) Dashboard (3) Shifter boot (2) Bearing (2) Brake rotors (2) Side marker light (1) Headlight (24) Tail light (6) Fog lights (6) Air filter (16) Cabin air filter (8) Fuel filter (5) Diesel fuel filter (11) Oil filter (9) Parking brake (3) Clutch (10) Grille (1) Fuel injectors (7) Reverse light switch (1) Accessory kit (1) Light bulb (7) Side marker bulb (1) Headlight bulb (24) Tail light bulb (12) Interior dome light bulb (6) Antifreeze coolant (2) Instrument panel light (15) License plate light (4) (1) Handle (1) Exhaust muffler (1) Trim cover (1) Engine (1) Power window motor (1) Starter motor (10) Transmission fluid (4) Brake fluid (1) Engine oil (9) Clock (17) Door trim panel (28) Front bumper (5) Rear bumper (4) Brake pads (4) Hydraulic pistons (1) Tires (2) Shift knob (14) Pump (8) Fuel pump (14) Car door (7) Push button (2) Power window switch (4) Instrument cluster (10) Radiator (6) Heater core (8) Wheel (4) Fuse box (58) Seat (14) Axle shaft (1) Crankshaft position sensor (1) Engine coolant temperature sensor (4) Parking sensors (1) Door lock (3) Brake system (1) Suspension system (3) Side mirror (16) Rearview mirror (3) Warning light – error code (16) Service warning light (38) Windshield wipers (3) Thermostat (2) Cylinder head (5) Tie rods (2) Center console tunnel (2) Valve (2) EGR valve (1) Blower motor (7) Side window (1) Steering wheel (6)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos