Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Gear Shift Knob

Peugeot 206 - Gear Shift Knob

Peugeot 206 (1998-2012 / MK 1)
How to remove the gear knob of the Peugeot 206
Removing the gear knob of the Peugeot 206 is a very simple operation to perform independently. To remove the gear knob, you need to lift the gear lever boot as …read all…
Posted on 3 May 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How do you replace the gear knob of the Peugeot 206?
In order to replace the gear knob of the Peugeot 206, you need to detach the clips at the base of the leather cover of the gear lever, so that it can be …read all…
Posted on 8 November 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Replacement of the gear lever knob on Peugeot 206
Place the gearbox in neutral, pull the boot base to release it and lift it completely. With a wire cutter, cut and remove the metal strap located on the …read all…
Posted on 12 May 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the gear knob on a Peugeot 206
Let's start by removing the gear lever boot with the help of a flat-blade screwdriver. While we will extract the cap, by pulling from the base of the knob, we …read all…
Posted on 6 March 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Replacement of the gear knob on Peugeot 206
In the case of the video, the knob attachment is broken and therefore the knob itself is already detached from its seat. If this is not the case for you, know …read all…
Posted on 21 February 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the gear knob of the Peugeot 206
In this video we will describe the various steps to replace the gear knob of a Peugeot 206. Let's start by unhooking the gearshift gaiter by pushing the rear …read all…
Posted on 16 January 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to change the gear knob on Peugeot 206
How to disassemble the car knob? Let's see how the knob is removed from above the gear rod 206. Unscrew the tightening screw on the side of the knob. We take …read all…
Posted on 18 December 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to remove the knob of a Peugeot 206
Is the knob of the Peugeot 206 damaged? Let's see how to remove it from the auction. We take the knob in our hands and rotate it to the left and right until it …read all…
Posted on 4 December 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to remove the gear knob on Peugeot 206
Is the knob of our Peugeot 206 damaged? Let's see how the central tunnel dismounts from above. Disconnect the frame of the leather cap with a plastic lever, …read all…
Posted on 3 December 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Replacement of the Peugeot 206 knob
Is the knob of the Peugeot 206 damaged and we do not know how to replace it? Let's see how to proceed with the replacement. With a plastic lever we disconnect …read all…
Posted on 30 November 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the gear knob on your Peugeot 206
Do you want to replace the gear knob on your Peugeot 207? Let's see how to do it: to begin, take the knob in your hands and rotate it to the left and right …read all…
Posted on 5 November 2023 by ScegliAuto
Cigarette Lighter (2) Airbags (6) Alternator (6) Loudspeaker (3) Shock absorbers (3) Antenna (2) Air conditioning (1) Car stereo (11) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Coil (3) Air Vents (4) Bushings (1) Arm (2) Gearbox (6) Spark plugs (7) Glow plugs (2) Soft top (4) Carburetor (1) Bodywork (1) Control unit (4) Key (16) Locking the trunk (1) Timing belt (17) V-belt (4) Air conditioning (1) Air conditioning controls (2) -board computer (10) Checks and maintenance (55) Dashboard (2) Bearing (2) Brake discs (2) Headlight (15) Tail light (5) Fog lights (4) Air filter (11) Cabin air filter (7) Petrol filter (5) Diesel filter (9) Oil filter (7) Hand brake (2) Clutch (5) Injectors (6) Reverse gear switch (1) Accessory Kit (1) Light bulb (7) Side turn signal light bulb (1) Headlight bulb (18) Rear light bulb (8) Interior lights ceiling light bulb (3) Antifreeze liquid (1) Dashboard light (14) License plate light (3) Third brake light (1) Muffler (1) Mask (1) Engine (1) Window motor (1) Starter motor (8) Gear oil (3) Engine oil (7) Door panel (23) Front bumper (3) Rear bumper (2) Brake pads (4) Tires (2) Gear Shift Knob (11) Pump (7) Fuel pump (13) Door (2) Push button (1) Window lift button (3) Instrument cluster (15) Radiator (5) Passenger compartment heating radiator (6) Wheel (4) Fuse box (34) Seat (9) Drive shaft (1) Crankshaft RPM sensor (1) Coolant temperature sensor (3) Lock (1) Lambda sensor (1) Suspensions (3) Outside rearview mirror (13) Interior rearview mirror (2) Windscreen wipers (1) Thermostat (2) Engine head (4) Steering rods (1) Central tunnel (1) Valve (1) EGR valve (1) Interior blower (5) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos