Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Fuel pump

Peugeot 206 - Fuel pump

Peugeot 206 (1998-2012 / MK 1)
Where is the fuel pump located in the Peugeot 206?
In this video, we can see where the fuel pump is located in the Peugeot 206, useful in case we need to replace it or its float. As shown, the pump is …read all…
Posted on 14 December 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the fuel pump in the Peugeot 206 CC?
As we can see in this tutorial, replacing the fuel pump in the Peugeot 260 CC is an extremely simple and fast operation. Before proceeding, let's disconnect …read all…
Posted on 10 August 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the fuel pump on a Peugeot 206
Let's briefly see in this guide the instructions and steps on how to disassemble and replace the fuel pump of the Peugeot 206. First of all, we open the rear …read all…
Posted on 29 December 2022 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
What is the fuel pump fuse in the Peugeot 206?
If the fuel pump of our Peugeot 206 has suddenly stopped working, the first thing we can do is check the state of the respective fuse whose location is …read all…
Posted on 23 December 2022 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How do I replace the fuel pump on the Peugeot 206?
To be able to replace the fuel pump of the Peugeot 206 you must first open the hood and disconnect the three breather pipes of the engine, so that you can …read all…
Posted on 7 May 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the fuel pump in Peugeot 206
In today's video we see how to replace the fuel pump in the Peugeot 206. First we open the rear door and lift the sofa. Now we remove the lid and then extract …read all…
Posted on 25 April 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to disassemble the fuel pump of the Peugeot 206
Let's go and see the procedure necessary for the disassembly and replacement of the fuel pump of the Peugeot 206. First of all, open the rear doors and start …read all…
Posted on 31 March 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Peugeot 206 petrol pump replacement
Let's see the disassembly of the fuel pump of the Peugeot 206 placed inside the tank of the car. We raise the front hood, disconnect the battery cables, then, …read all…
Posted on 30 January 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Start Peugeot 206 HDi diesel pump
In this video tutorial we will see the main steps to be able to prime a diesel fuel pump of a car, in this case of a Peugeot 206 HDi. First by opening the …read all…
Posted on 16 December 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to change the fuel pump on Peugeot 206
Is the fuel pump damaged? Let's see disassembly and assembly on the Peugeot 206. We remove the seats of the rear seats of the car. Unscrew the tightening …read all…
Posted on 3 December 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to disassemble the fuel pump of a Peugeot 206
This video describes how to disassemble the fuel pump of a Peugeot 206. We disconnect the battery cables, then, we remove the seat of the rear seats of the …read all…
Posted on 27 November 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the fuel pump of the Peugeot 206
As a first operation it will be necessary to go to identify the position of the pump, in fact it is inside the fuel tank, then go and lift the rear passenger …read all…
Posted on 22 September 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Procedure for bleeding the diesel fuel pump and filter
After an intervention, even the most trivial, such as changing the diesel filter, it is always necessary to bleed the air from the fuel injection system. Once …read all…
Posted on 9 August 2023 by ScegliAuto
Cigarette Lighter (2) Airbags (6) Alternator (6) Loudspeaker (3) Shock absorbers (3) Antenna (2) Air conditioning (1) Car stereo (11) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Coil (3) Air Vents (4) Bushings (1) Arm (2) Gearbox (6) Spark plugs (7) Glow plugs (2) Soft top (4) Carburetor (1) Bodywork (1) Control unit (4) Key (16) Locking the trunk (1) Timing belt (17) V-belt (4) Air conditioning (1) Air conditioning controls (2) -board computer (10) Checks and maintenance (55) Dashboard (2) Bearing (2) Brake discs (2) Headlight (15) Tail light (5) Fog lights (4) Air filter (11) Cabin air filter (7) Petrol filter (5) Diesel filter (9) Oil filter (7) Hand brake (2) Clutch (5) Injectors (6) Reverse gear switch (1) Accessory Kit (1) Light bulb (7) Side turn signal light bulb (1) Headlight bulb (18) Rear light bulb (8) Interior lights ceiling light bulb (3) Antifreeze liquid (1) Dashboard light (14) License plate light (3) Third brake light (1) Muffler (1) Mask (1) Engine (1) Window motor (1) Starter motor (8) Gear oil (3) Engine oil (7) Door panel (23) Front bumper (3) Rear bumper (2) Brake pads (4) Tires (2) Gear Shift Knob (11) Pump (7) Fuel pump (13) Door (2) Push button (1) Window lift button (3) Instrument cluster (15) Radiator (5) Passenger compartment heating radiator (6) Wheel (4) Fuse box (34) Seat (9) Drive shaft (1) Crankshaft RPM sensor (1) Coolant temperature sensor (3) Lock (1) Lambda sensor (1) Suspensions (3) Outside rearview mirror (13) Interior rearview mirror (2) Windscreen wipers (1) Thermostat (2) Engine head (4) Steering rods (1) Central tunnel (1) Valve (1) EGR valve (1) Interior blower (5) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos