Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Oil filter

Peugeot 206 - Oil filter

Peugeot 206 (1998-2012 / MK 1)
Change of the filter and engine oil of the Peugeot 206.
Let's see how to proceed with the replacement of the oil filter of the Peugeot 206. We put the car on a lifting bridge, open the hood, and remove the oil level …read all…
Posted on 23 November 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Replacing the oil filter on a Peugeot 206
Replacing the oil filter on a Peugeot 206? Let's see how to remove it from inside the engine compartment. We lift the bonnet and put it in safety, then, with a …read all…
Posted on 2 December 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Replacing the oil filter on Peugeot 206 1 4 HDi
The oil filter is changed very often together with the engine oil, let's see how to proceed with the replacement. We pull up the stem of the engine hood …read all…
Posted on 28 November 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the engine oil filter on a Peugeot 206
How to replace the engine oil filter on a Peugeot 206. Let's see in this video guide how to proceed with the replacement: open the car door and pull up the …read all…
Posted on 29 October 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Engine oil and filter replacement
Place a pan of suitable capacity under the oil pan to collect the used oil and unscrew the drain plug located at the rear; once the drain is complete, apply a …read all…
Posted on 17 August 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Engine oil filter replacement
The guide shows you how to properly change your car's oil filter. To carry out this replacement, you must lift your car off the ground with a jack. The engine …read all…
Posted on 12 August 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Engine oil and fillter replacement
Remove the plastic cover placed and open the oil cap (this will help drain); remove the plastic protection from under the engine and place a tray to collect …read all…
Posted on 8 August 2023 by ScegliAuto
Cigarette Lighter (2) Airbags (6) Alternator (6) Loudspeaker (3) Shock absorbers (3) Antenna (2) Air conditioning (1) Car stereo (11) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Coil (3) Air Vents (4) Bushings (1) Arm (2) Gearbox (6) Spark plugs (7) Glow plugs (2) Soft top (4) Carburetor (1) Bodywork (1) Control unit (4) Key (16) Locking the trunk (1) Timing belt (17) V-belt (4) Air conditioning (1) Air conditioning controls (2) -board computer (10) Checks and maintenance (55) Dashboard (2) Bearing (2) Brake discs (2) Headlight (15) Tail light (5) Fog lights (4) Air filter (11) Cabin air filter (7) Petrol filter (5) Diesel filter (9) Oil filter (7) Hand brake (2) Clutch (5) Injectors (6) Reverse gear switch (1) Accessory Kit (1) Light bulb (7) Side turn signal light bulb (1) Headlight bulb (18) Rear light bulb (8) Interior lights ceiling light bulb (3) Antifreeze liquid (1) Dashboard light (14) License plate light (3) Third brake light (1) Muffler (1) Mask (1) Engine (1) Window motor (1) Starter motor (8) Gear oil (3) Engine oil (7) Door panel (23) Front bumper (3) Rear bumper (2) Brake pads (4) Tires (2) Gear Shift Knob (11) Pump (7) Fuel pump (13) Door (2) Push button (1) Window lift button (3) Instrument cluster (15) Radiator (5) Passenger compartment heating radiator (6) Wheel (4) Fuse box (34) Seat (9) Drive shaft (1) Crankshaft RPM sensor (1) Coolant temperature sensor (3) Lock (1) Lambda sensor (1) Suspensions (3) Outside rearview mirror (13) Interior rearview mirror (2) Windscreen wipers (1) Thermostat (2) Engine head (4) Steering rods (1) Central tunnel (1) Valve (1) EGR valve (1) Interior blower (5) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos