Peugeot 206 - Body
Body Peugeot 206 (1998-2012 / mk 1)
Cigarette lighter (2)
Airbag (9)
Alternator (10)
Speaker (5)
Shocks (3)
Antenna (5)
Air conditioning (2)
Car stereo (11)
Anti-roll bar (2)
Roof rack bars (1)
Battery (17)
Ignition coil (3)
Air vents (4)
Bushings (1)
Control arm (2)
Transmission (10)
Spark plugs (7)
Glow plugs (2)
Convertible top (7)
Carburetor (1)
Body (8)
Control unit (2)
Key (26)
Trunk lock (1)
Timing belt (22)
V-belt (6)
Air conditioner (2)
A/C controls (5)
Onboard computer (10)
Checks and maintenance (56)
Dashboard (3)
Shifter boot (2)
Bearing (2)
Brake rotors (2)
Side marker light (1)
Headlight (24)
Tail light (6)
Fog lights (6)
Air filter (16)
Cabin air filter (8)
Fuel filter (5)
Diesel fuel filter (11)
Oil filter (9)
Parking brake (3)
Clutch (10)
Grille (1)
Fuel injectors (7)
Reverse light switch (1)
Accessory kit (1)
Light bulb (7)
Side marker bulb (1)
Headlight bulb (24)
Tail light bulb (12)
Interior dome light bulb (6)
Antifreeze coolant (2)
Instrument panel light (15)
License plate light (4)
(1)
Handle (1)
Exhaust muffler (1)
Trim cover (1)
Engine (1)
Power window motor (1)
Starter motor (10)
Transmission fluid (4)
Brake fluid (1)
Engine oil (9)
Clock (17)
Door trim panel (28)
Front bumper (5)
Rear bumper (4)
Brake pads (4)
Hydraulic pistons (1)
Tires (2)
Shift knob (14)
Pump (8)
Fuel pump (14)
Car door (7)
Push button (2)
Power window switch (4)
Instrument cluster (10)
Radiator (6)
Heater core (8)
Wheel (4)
Fuse box (58)
Seat (14)
Axle shaft (1)
Crankshaft position sensor (1)
Engine coolant temperature sensor (4)
Parking sensors (1)
Door lock (3)
Brake system (1)
Suspension system (3)
Side mirror (16)
Rearview mirror (3)
Warning light – error code (16)
Service warning light (38)
Windshield wipers (3)
Thermostat (2)
Cylinder head (5)
Tie rods (2)
Center console tunnel (2)
Valve (2)
EGR valve (1)
Blower motor (7)
Side window (1)
Steering wheel (6)
|
How to Replace the External Wing Mirror on a Ford C MAX
In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.
Watch the video!
by ScegliAuto
More videos
|