Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 206
  6. : Tail light

Peugeot 206 - Tail light

Tail Light Peugeot 206 (1998-2012 / mk 1)

Peugeot 206 (1998-2012 / MK 1)
How to replace the rear lights in the Peugeot 206?

In this tutorial we can see how to replace the rear lights in the Peugeot 206, an extremely simple and quick operation. First of all, make sure that the key is …Read all…
Posted on 18 January 2025 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to Remove the Rear Headlight of the Peugeot 206

In this video tutorial, find useful instructions to remove and replace the rear headlight and its bulbs on the Peugeot 206. First, open the boot lid and start …Read all…
Posted on 21 July 2026 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to Replace the Rear Light on the Peugeot 206?

To replace the rear light on the Peugeot 206, open the tailgate from the boot and remove the rivet located inside the boot, corresponding to the light to be …Read all…
Posted on 14 July 2026 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to Remove the Third Brake Light on the Peugeot 206

Today, we will see the instructions that will allow you to remove the third brake light on the Peugeot 206 in simple and quick steps. First, open the boot and …Read all…
Posted on 31 May 2026 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to Remove the Rear Light of a Peugeot 206

Before you start, open the boot of your Peugeot 206. First, unclip and remove the clip securing the internal side cover of the boot, allowing access to the …Read all…
Posted on 22 May 2026 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Removing the Rear Light from a Peugeot 206

In today’s tutorial video, you will learn how to remove the rear light from a Peugeot 206. First, open the boot lid: then remove the side clip to take off …Read all…
Posted on 26 April 2026 by ScegliAuto

Cigarette lighter (2) Airbag (9) Alternator (10) Speaker (5) Shocks (3) Antenna (5) Air conditioning (2) Car stereo (11) Anti-roll bar (2) Roof rack bars (1) Battery (17) Ignition coil (3) Air vents (4) Bushings (1) Control arm (2) Transmission (10) Spark plugs (7) Glow plugs (2) Convertible top (7) Carburetor (1) Body (8) Control unit (2) Key (26) Trunk lock (1) Timing belt (22) V-belt (6) Air conditioner (2) A/C controls (5) Onboard computer (10) Checks and maintenance (56) Dashboard (3) Shifter boot (2) Bearing (2) Brake rotors (2) Side marker light (1) Headlight (24) Tail light (6) Fog lights (6) Air filter (16) Cabin air filter (8) Fuel filter (5) Diesel fuel filter (11) Oil filter (9) Parking brake (3) Clutch (10) Grille (1) Fuel injectors (7) Reverse light switch (1) Accessory kit (1) Light bulb (7) Side marker bulb (1) Headlight bulb (24) Tail light bulb (12) Interior dome light bulb (6) Antifreeze coolant (2) Instrument panel light (15) License plate light (4) (1) Handle (1) Exhaust muffler (1) Trim cover (1) Engine (1) Power window motor (1) Starter motor (10) Transmission fluid (4) Brake fluid (1) Engine oil (9) Clock (17) Door trim panel (28) Front bumper (5) Rear bumper (4) Brake pads (4) Hydraulic pistons (1) Tires (2) Shift knob (14) Pump (8) Fuel pump (14) Car door (7) Push button (2) Power window switch (4) Instrument cluster (10) Radiator (6) Heater core (8) Wheel (4) Fuse box (58) Seat (14) Axle shaft (1) Crankshaft position sensor (1) Engine coolant temperature sensor (4) Parking sensors (1) Door lock (3) Brake system (1) Suspension system (3) Side mirror (16) Rearview mirror (3) Warning light – error code (16) Service warning light (38) Windshield wipers (3) Thermostat (2) Cylinder head (5) Tie rods (2) Center console tunnel (2) Valve (2) EGR valve (1) Blower motor (7) Side window (1) Steering wheel (6)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos