Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Light bulb

Peugeot 206 - Light bulb

Peugeot 206 (1998-2012 / MK 1)
How to replace the courtesy light bulb of the Peugeot 206
In this video we can see how to change the courtesy light bulb of the Peugeot 206: we leverage with a small screwdriver in order to remove the plate from its …read all…
Posted on 31 March 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to change the display bulbs of the Peugeot 206
Let's see how to change the Peugeot 206 display bulbs: First we have to turn off the ignition; with a flat screwdriver we pry behind the eyelid to remove it …read all…
Posted on 22 October 2022 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to change the front bulbs in the Peugeot 206?
The front bulbs can be replaced by accessing the front hood which must therefore be opened before starting any operation. We locate the headlight cover and …read all…
Posted on 12 November 2022 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to change the front turn signal bulbs in the Peugeot 206?
Replacing the front indicator light bulb in the Peugeot 206 is a very simple and quick operation, let's see how to do it in the attached video tutorial. We …read all…
Posted on 15 March 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the interior ceiling light bulb on the Peugeot 206?
In order to replace the Peugeot 206 internal ceiling light bulb, a screwdriver must be used to pry and extract the light from its housing. Subsequently it will …read all…
Posted on 7 March 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Peugeot 206 position light replacement
In this very simple and quick video tutorial we will see how to remove and replace the headlight position light of a Peugeot 206 in a few steps. First let's …read all…
Posted on 24 December 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Peugeot 206 license plate light bulb replacement
To replace the bulb that illuminates the rear number plate, the glass applied to the lamp holder must be practically removed: therefore, open the tailgate and …read all…
Posted on 9 September 2023 by ScegliAuto
Cigarette Lighter (2) Airbags (6) Alternator (6) Loudspeaker (3) Shock absorbers (3) Antenna (2) Air conditioning (1) Car stereo (11) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Coil (3) Air Vents (4) Bushings (1) Arm (2) Gearbox (6) Spark plugs (7) Glow plugs (2) Soft top (4) Carburetor (1) Bodywork (1) Control unit (4) Key (16) Locking the trunk (1) Timing belt (17) V-belt (4) Air conditioning (1) Air conditioning controls (2) -board computer (10) Checks and maintenance (55) Dashboard (2) Bearing (2) Brake discs (2) Headlight (15) Tail light (5) Fog lights (4) Air filter (11) Cabin air filter (7) Petrol filter (5) Diesel filter (9) Oil filter (7) Hand brake (2) Clutch (5) Injectors (6) Reverse gear switch (1) Accessory Kit (1) Light bulb (7) Side turn signal light bulb (1) Headlight bulb (18) Rear light bulb (8) Interior lights ceiling light bulb (3) Antifreeze liquid (1) Dashboard light (14) License plate light (3) Third brake light (1) Muffler (1) Mask (1) Engine (1) Window motor (1) Starter motor (8) Gear oil (3) Engine oil (7) Door panel (23) Front bumper (3) Rear bumper (2) Brake pads (4) Tires (2) Gear Shift Knob (11) Pump (7) Fuel pump (13) Door (2) Push button (1) Window lift button (3) Instrument cluster (15) Radiator (5) Passenger compartment heating radiator (6) Wheel (4) Fuse box (34) Seat (9) Drive shaft (1) Crankshaft RPM sensor (1) Coolant temperature sensor (3) Lock (1) Lambda sensor (1) Suspensions (3) Outside rearview mirror (13) Interior rearview mirror (2) Windscreen wipers (1) Thermostat (2) Engine head (4) Steering rods (1) Central tunnel (1) Valve (1) EGR valve (1) Interior blower (5) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos