Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Gearbox

Peugeot 206 - Gearbox

Peugeot 206 (1998-2012 / MK 1)
How do you replace the gear selector cables of the Peugeot 206?
In order to replace the gear selector cables of the Peugeot 206, you need to open the hood so that you have access to the components located inside the engine …read all…
Posted on 13 March 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the gear shift cable in the Peugeot 206?
In this tutorial, we can see how to replace the shift control cable in the Peugeot 206, a very simple operation. First of all, we lift the front side of the …read all…
Posted on 12 August 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace gearbox oil on Peugeot 206
In this video tutorial we can see how to replace the gearbox oil on Peugeot 206 1.4 Hdi. Lift the bonnet and secure it with the special rod. Remove the air …read all…
Posted on 16 June 2022 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How do you replace the gear lever on a Peugeot 206?
In order to replace the Peugeot 206 gear lever, you need to remove the hooks located at the base of the gear gaiter, which can be lifted giving access to the …read all…
Posted on 17 November 2022 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How do I replace the gear knob on the Peugeot 206?
In order to replace the gear knob of the Peugeot 206 you have to remove the old knob from the gear lever, simply by sliding it off. Then it will be necessary …read all…
Posted on 27 February 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Replace gear lever on Peugeot 206
Replacement of the gear knob on Peugeot 206, let's see how to proceed. We disconnect the frame of the leather cap with a plastic lever, take the knob in our …read all…
Posted on 1 December 2023 by ScegliAuto
Cigarette Lighter (2) Airbags (6) Alternator (6) Loudspeaker (3) Shock absorbers (3) Antenna (2) Air conditioning (1) Car stereo (11) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Coil (3) Air Vents (4) Bushings (1) Arm (2) Gearbox (6) Spark plugs (7) Glow plugs (2) Soft top (4) Carburetor (1) Bodywork (1) Control unit (4) Key (16) Locking the trunk (1) Timing belt (17) V-belt (4) Air conditioning (1) Air conditioning controls (2) -board computer (10) Checks and maintenance (55) Dashboard (2) Bearing (2) Brake discs (2) Headlight (15) Tail light (5) Fog lights (4) Air filter (11) Cabin air filter (7) Petrol filter (5) Diesel filter (9) Oil filter (7) Hand brake (2) Clutch (5) Injectors (6) Reverse gear switch (1) Accessory Kit (1) Light bulb (7) Side turn signal light bulb (1) Headlight bulb (18) Rear light bulb (8) Interior lights ceiling light bulb (3) Antifreeze liquid (1) Dashboard light (14) License plate light (3) Third brake light (1) Muffler (1) Mask (1) Engine (1) Window motor (1) Starter motor (8) Gear oil (3) Engine oil (7) Door panel (23) Front bumper (3) Rear bumper (2) Brake pads (4) Tires (2) Gear Shift Knob (11) Pump (7) Fuel pump (13) Door (2) Push button (1) Window lift button (3) Instrument cluster (15) Radiator (5) Passenger compartment heating radiator (6) Wheel (4) Fuse box (34) Seat (9) Drive shaft (1) Crankshaft RPM sensor (1) Coolant temperature sensor (3) Lock (1) Lambda sensor (1) Suspensions (3) Outside rearview mirror (13) Interior rearview mirror (2) Windscreen wipers (1) Thermostat (2) Engine head (4) Steering rods (1) Central tunnel (1) Valve (1) EGR valve (1) Interior blower (5) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos