Peugeot 206 - Heater core
Heater Core Peugeot 206 (1998-2012 / mk 1)
Cigarette lighter (2)
Airbag (9)
Alternator (10)
Speaker (5)
Shocks (3)
Antenna (5)
Air conditioning (2)
Car stereo (11)
Anti-roll bar (2)
Roof rack bars (1)
Battery (17)
Ignition coil (3)
Air vents (4)
Bushings (1)
Control arm (2)
Transmission (10)
Spark plugs (7)
Glow plugs (2)
Convertible top (7)
Carburetor (1)
Body (8)
Control unit (2)
Key (26)
Trunk lock (1)
Timing belt (22)
V-belt (6)
Air conditioner (2)
A/C controls (5)
Onboard computer (10)
Checks and maintenance (56)
Dashboard (3)
Shifter boot (2)
Bearing (2)
Brake rotors (2)
Side marker light (1)
Headlight (24)
Tail light (6)
Fog lights (6)
Air filter (16)
Cabin air filter (8)
Fuel filter (5)
Diesel fuel filter (11)
Oil filter (9)
Parking brake (3)
Clutch (10)
Grille (1)
Fuel injectors (7)
Reverse light switch (1)
Accessory kit (1)
Light bulb (7)
Side marker bulb (1)
Headlight bulb (24)
Tail light bulb (12)
Interior dome light bulb (6)
Antifreeze coolant (2)
Instrument panel light (15)
License plate light (4)
(1)
Handle (1)
Exhaust muffler (1)
Trim cover (1)
Engine (1)
Power window motor (1)
Starter motor (10)
Transmission fluid (4)
Brake fluid (1)
Engine oil (9)
Clock (17)
Door trim panel (28)
Front bumper (5)
Rear bumper (4)
Brake pads (4)
Hydraulic pistons (1)
Tires (2)
Shift knob (14)
Pump (8)
Fuel pump (14)
Car door (7)
Push button (2)
Power window switch (4)
Instrument cluster (10)
Radiator (6)
Heater core (8)
Wheel (4)
Fuse box (58)
Seat (14)
Axle shaft (1)
Crankshaft position sensor (1)
Engine coolant temperature sensor (4)
Parking sensors (1)
Door lock (3)
Brake system (1)
Suspension system (3)
Side mirror (16)
Rearview mirror (3)
Warning light – error code (16)
Service warning light (38)
Windshield wipers (3)
Thermostat (2)
Cylinder head (5)
Tie rods (2)
Center console tunnel (2)
Valve (2)
EGR valve (1)
Blower motor (7)
Side window (1)
Steering wheel (6)
|
How to reset the tyre pressure warning light on the Citroën DS4?
The tyre pressure warning light on the Citroën DS4 can be reset by inflating the tyres until they reach the corresponding pressure value, which is indicated on the sticker attached to the driver's door pillar. Once all tyres are at this value, turn on the ignition by inserting the key into the ignition switch; this should make the warning light disappear from the dashboard. If it does not reset, start the engine and drive to allow the sensors to read the new values.
Watch the video!
by ScegliAuto
More videos
|