Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Pump

Peugeot 206 - Pump

Peugeot 206 (1998-2012 / MK 1)
How do you replace the water pump of a Peugeot 206?
Replacing the water pump on the Peugeot 206 is done by opening the hood, so that you can access the components located on the left side of the engine block: …read all…
Posted on 28 May 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the washer pump in the Peugeot 206?
In this tutorial we can see how to replace the windshield washer pump in the Peugeot 206, an extremely simple and fast operation. First of all we lift the …read all…
Posted on 13 October 2022 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How do you replace the water pump on a Peugeot 206?
In order to be able to replace the water pump on the Peugeot 206, you need to go and open the bonnet, so that you can disconnect the pipes connected to the …read all…
Posted on 13 December 2022 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the float in the Peugeot 206?
Replacing the float in the Peugeot 206 is very simple, but the operation requires disassembly of the pump as the two elements are directly connected and work …read all…
Posted on 1 September 2022 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Removing the Peugeot 206 power steering reservoir and pump
In this video tutorial we will see how to disassemble the power steering pump and reservoir of a Peugeot 206, in simple steps. First of all we open the bonnet …read all…
Posted on 8 March 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Replacement windshield wiper pump on Peugeot 206
Is the wiper pump damaged? Let's see how it can be removed on 206. Remove the pins on the side of the stone guard and on the mudguard with a socket wrench; we …read all…
Posted on 6 December 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Removal of the water pump on Peugeot 206
Let's replace the water pump on a Peugeot 206, let's see how to do it. We lift the bonnet and put it in safety, then we remove the wheel. With a screwdriver we …read all…
Posted on 3 December 2023 by ScegliAuto
Cigarette Lighter (2) Airbags (6) Alternator (6) Loudspeaker (3) Shock absorbers (3) Antenna (2) Air conditioning (1) Car stereo (11) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Coil (3) Air Vents (4) Bushings (1) Arm (2) Gearbox (6) Spark plugs (7) Glow plugs (2) Soft top (4) Carburetor (1) Bodywork (1) Control unit (4) Key (16) Locking the trunk (1) Timing belt (17) V-belt (4) Air conditioning (1) Air conditioning controls (2) -board computer (10) Checks and maintenance (55) Dashboard (2) Bearing (2) Brake discs (2) Headlight (15) Tail light (5) Fog lights (4) Air filter (11) Cabin air filter (7) Petrol filter (5) Diesel filter (9) Oil filter (7) Hand brake (2) Clutch (5) Injectors (6) Reverse gear switch (1) Accessory Kit (1) Light bulb (7) Side turn signal light bulb (1) Headlight bulb (18) Rear light bulb (8) Interior lights ceiling light bulb (3) Antifreeze liquid (1) Dashboard light (14) License plate light (3) Third brake light (1) Muffler (1) Mask (1) Engine (1) Window motor (1) Starter motor (8) Gear oil (3) Engine oil (7) Door panel (23) Front bumper (3) Rear bumper (2) Brake pads (4) Tires (2) Gear Shift Knob (11) Pump (7) Fuel pump (13) Door (2) Push button (1) Window lift button (3) Instrument cluster (15) Radiator (5) Passenger compartment heating radiator (6) Wheel (4) Fuse box (34) Seat (9) Drive shaft (1) Crankshaft RPM sensor (1) Coolant temperature sensor (3) Lock (1) Lambda sensor (1) Suspensions (3) Outside rearview mirror (13) Interior rearview mirror (2) Windscreen wipers (1) Thermostat (2) Engine head (4) Steering rods (1) Central tunnel (1) Valve (1) EGR valve (1) Interior blower (5) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos