Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Battery

Peugeot 206 - Battery

Peugeot 206 (1998-2012 / MK 1)
Replacement of the battery of the Peugeot 206
If the battery of the Peugeot 206 is discharged and does not hold up to subsequent charging attempts, we must proceed with the replacement. We open the engine …read all…
Posted on 12 March 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Replacement of the Peugeot 206 battery.
If the battery of the Peugeot has discharged and does not support subsequent charging attempts, it needs to be replaced. To do this, open the engine hood and …read all…
Posted on 13 February 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the battery of the Peugeot 206.
If you want to independently replace the battery in your Peugeot 206, simply follow the steps described below. First, park the car safely and turn it off …read all…
Posted on 12 September 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to deactivate the Eco mode on a Peugeot 206
There are different ways to disable the "Eco" mode on a Peugeot 206, as shown in the video, but also on a Citroen. In practice, when the vehicle turns off, a …read all…
Posted on 12 July 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the battery in the Peugeot 206
In this video tutorial we can see how to replace the Peugeot battery by following a few simple steps that will help you manage your vehicle in the best …read all…
Posted on 19 May 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Battery replacement on Peugeot 206
Open the hood and put on the special support rod. Facing the passenger compartment, the battery is on your right, at the same height as the engine compartment. …read all…
Posted on 30 March 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the Peugeot 206 battery
Start the process by unhooking the hood from the special lever and lifting it, to perform this type of operation no special tool will be necessary, in fact …read all…
Posted on 27 September 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the Peugeot 206 battery
The first operation is to unhook the hood from the special lever and lift it, to perform this type of operation no special tool will be required, in fact after …read all…
Posted on 27 September 2023 by ScegliAuto
Cigarette Lighter (2) Airbags (6) Alternator (6) Loudspeaker (3) Shock absorbers (3) Antenna (2) Air conditioning (1) Car stereo (11) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Coil (3) Air Vents (4) Bushings (1) Arm (2) Gearbox (6) Spark plugs (7) Glow plugs (2) Soft top (4) Carburetor (1) Bodywork (1) Control unit (4) Key (16) Locking the trunk (1) Timing belt (17) V-belt (4) Air conditioning (1) Air conditioning controls (2) -board computer (10) Checks and maintenance (55) Dashboard (2) Bearing (2) Brake discs (2) Headlight (15) Tail light (5) Fog lights (4) Air filter (11) Cabin air filter (7) Petrol filter (5) Diesel filter (9) Oil filter (7) Hand brake (2) Clutch (5) Injectors (6) Reverse gear switch (1) Accessory Kit (1) Light bulb (7) Side turn signal light bulb (1) Headlight bulb (18) Rear light bulb (8) Interior lights ceiling light bulb (3) Antifreeze liquid (1) Dashboard light (14) License plate light (3) Third brake light (1) Muffler (1) Mask (1) Engine (1) Window motor (1) Starter motor (8) Gear oil (3) Engine oil (7) Door panel (23) Front bumper (3) Rear bumper (2) Brake pads (4) Tires (2) Gear Shift Knob (11) Pump (7) Fuel pump (13) Door (2) Push button (1) Window lift button (3) Instrument cluster (15) Radiator (5) Passenger compartment heating radiator (6) Wheel (4) Fuse box (34) Seat (9) Drive shaft (1) Crankshaft RPM sensor (1) Coolant temperature sensor (3) Lock (1) Lambda sensor (1) Suspensions (3) Outside rearview mirror (13) Interior rearview mirror (2) Windscreen wipers (1) Thermostat (2) Engine head (4) Steering rods (1) Central tunnel (1) Valve (1) EGR valve (1) Interior blower (5) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos