Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Blower motor

Peugeot 206 - Blower motor

Blower Motor Peugeot 206 (1998-2012 / mk 1)

Peugeot 206 (1998-2012 / MK 1)
How do you replace the cabin fan of the Peugeot 206?
The cabin fan installed on the Peugeot 206 can be replaced by loosening the screws that secure the trim panel located on the side of the driver's footwell: …Read all…
Posted on 24 September 2025 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Heating fan of the Peugeot 206 that only works at the highest speed.
A common issue that occurs on the Peugeot 206 is with the cabin fan, which only works at maximum speed, without working at intermediate speeds. The solution is …Read all…
Posted on 16 February 2025 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Removing the Cabin Fan from Peugeot 206
In today's tutorial, you will learn how to remove the heating fan from the cabin of a Peugeot 206. First, access the inside of the car and remove the steering …Read all…
Posted on 19 June 2026 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to Remove the Radiator Fan from a Peugeot 206
The radiator fan in your car is simply secured with bolts around it. This means you just need to disconnect the fan connectors and unscrew those bolts to …Read all…
Posted on 16 May 2026 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to Replace the Fan Resistor on a Peugeot 206
How do you replace the fan resistor on a Peugeot 206? Let's see how to perform the disassembly in this guide. Remove the glove compartment from inside the …Read all…
Posted on 1 April 2026 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to remove the cabin ventilation fan from a Peugeot 206
How do you remove the cabin ventilation fan from a Peugeot 206? The cabin ventilation fan is located directly under the steering column; use a socket spanner …Read all…
Posted on 22 March 2026 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Instructions for Replacing the Cabin Fan
The cabin fan, complete with drive motor, is located behind the central tunnel console on the driver's side. To remove it, create space by dismantling the …Read all…
Posted on 21 February 2026 by ScegliAuto
Cigarette lighter (2) Airbag (9) Alternator (10) Speaker (5) Shocks (3) Antenna (5) Air conditioning (2) Car stereo (11) Anti-roll bar (2) Roof rack bars (1) Battery (17) Ignition coil (3) Air vents (4) Bushings (1) Control arm (2) Transmission (10) Spark plugs (7) Glow plugs (2) Convertible top (7) Carburetor (1) Body (8) Control unit (2) Key (27) Trunk lock (1) Timing belt (22) V-belt (6) Air conditioner (2) A/C controls (5) Onboard computer (10) Checks and maintenance (56) Dashboard (3) Shifter boot (3) Bearing (2) Brake rotors (2) Side marker light (1) Headlight (24) Tail light (6) Fog lights (6) Air filter (16) Cabin air filter (9) Fuel filter (5) Diesel fuel filter (11) Oil filter (9) Parking brake (3) Clutch (10) Grille (1) Fuel injectors (7) Reverse light switch (1) Accessory kit (1) Light bulb (8) Side marker bulb (1) Headlight bulb (26) Tail light bulb (13) Interior dome light bulb (6) Antifreeze coolant (2) Instrument panel light (15) License plate light (4) (1) Handle (1) Exhaust muffler (1) Trim cover (1) Engine (1) Power window motor (1) Starter motor (11) Transmission fluid (4) Brake fluid (1) Engine oil (9) Clock (17) Door trim panel (28) Front bumper (5) Rear bumper (4) Brake pads (4) Hydraulic pistons (1) Tires (2) Shift knob (15) Pump (8) Fuel pump (14) Car door (7) Push button (2) Power window switch (4) Instrument cluster (10) Radiator (6) Heater core (8) Wheel (4) Fuse box (61) Seat (14) Axle shaft (1) Crankshaft position sensor (1) Engine coolant temperature sensor (4) Parking sensors (1) Door lock (3) Brake system (1) Suspension system (3) Side mirror (16) Rearview mirror (3) Warning light – error code (16) Service warning light (39) Windshield wipers (4) Thermostat (2) Cylinder head (5) Tie rods (2) Center console tunnel (2) Valve (2) EGR valve (1) Blower motor (7) Side window (1) Steering wheel (6)

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos