Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Car stereo

Peugeot 206 - Car stereo

Peugeot 206 (1998-2012 / MK 1)
Replacement of the Peugeot 206 car radio.
Let's see how to replace the factory-installed car radio in the Peugeot 206 with a Pioneer brand model. Unlock the old device by inserting two rigid rods of …read all…
Posted on 20 January 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to connect an AUX-INX cable to the Peugeot 206 car stereo.
In this video, we see how to install the AUX-IN adapter on the radio of a Peugeot 206: we need to remove the upper cover, where the clock is located. To remove …read all…
Posted on 26 December 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to remove the car radio from the Peugeot 206.
If you want to dismantle the factory car radio in your Peugeot 206 by yourself but don't know how to do it, then all you have to do is read the following steps …read all…
Posted on 20 November 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Entering the security code for the Peugeot 206 car radio.
When the power supply to the Peugeot 206 car radio is cut off, a security lock is automatically activated, which can only be removed by entering a specific …read all…
Posted on 29 August 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Replacing the car radio in the Peugeot 206
Let's see how to operate, having to change the car radio in our Peugeot 206. With the car off, we insert the special disassembly needles into the holes on the …read all…
Posted on 11 May 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Replacing the car radio on Peugeot 206
Working with the engine and instrument panel off, we begin the disassembly of the original car radio. This is a very simple operation and now we will …read all…
Posted on 28 April 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the car stereo in the Peugeot 206
We insert the metal keys in the four holes that we find in the original car radio. We pull hard towards us to extract the device. We disconnect the power cable …read all…
Posted on 16 April 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Replacing the car radio on Peugeot 206
To remove the radio on Peugeot 206, as on many other car models (Peugeot and not only), you need to get the special double keys shown in the video. The …read all…
Posted on 20 February 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to disassemble the Peugeot 206 radio
Do we want to remove the car radio of a Peugeot 206? We use the original or aftermarket metal dongles to disassemble the car radio. Insert the keys in the …read all…
Posted on 13 January 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Guide to replacing your car stereo
The following guide shows you how to replace the car stereo in your car correctly. You begin to disassemble the old car radio and to do so, just follow the …read all…
Posted on 6 August 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Car radio disassembly instructions
In order to disassemble the original car radio, it is necessary to have the appropriate extraction keys or it must be shaped with high-strength steel wire, a …read all…
Posted on 13 July 2023 by ScegliAuto
Cigarette Lighter (2) Airbags (6) Alternator (6) Loudspeaker (3) Shock absorbers (3) Antenna (2) Air conditioning (1) Car stereo (11) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Coil (3) Air Vents (4) Bushings (1) Arm (2) Gearbox (6) Spark plugs (7) Glow plugs (2) Soft top (4) Carburetor (1) Bodywork (1) Control unit (4) Key (16) Locking the trunk (1) Timing belt (17) V-belt (4) Air conditioning (1) Air conditioning controls (2) -board computer (10) Checks and maintenance (55) Dashboard (2) Bearing (2) Brake discs (2) Headlight (15) Tail light (5) Fog lights (4) Air filter (11) Cabin air filter (7) Petrol filter (5) Diesel filter (9) Oil filter (7) Hand brake (2) Clutch (5) Injectors (6) Reverse gear switch (1) Accessory Kit (1) Light bulb (7) Side turn signal light bulb (1) Headlight bulb (18) Rear light bulb (8) Interior lights ceiling light bulb (3) Antifreeze liquid (1) Dashboard light (14) License plate light (3) Third brake light (1) Muffler (1) Mask (1) Engine (1) Window motor (1) Starter motor (8) Gear oil (3) Engine oil (7) Door panel (23) Front bumper (3) Rear bumper (2) Brake pads (4) Tires (2) Gear Shift Knob (11) Pump (7) Fuel pump (13) Door (2) Push button (1) Window lift button (3) Instrument cluster (15) Radiator (5) Passenger compartment heating radiator (6) Wheel (4) Fuse box (34) Seat (9) Drive shaft (1) Crankshaft RPM sensor (1) Coolant temperature sensor (3) Lock (1) Lambda sensor (1) Suspensions (3) Outside rearview mirror (13) Interior rearview mirror (2) Windscreen wipers (1) Thermostat (2) Engine head (4) Steering rods (1) Central tunnel (1) Valve (1) EGR valve (1) Interior blower (5) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos