Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Fuel filter

Peugeot 206 - Fuel filter

Fuel Filter Peugeot 206 (1998-2012 / mk 1)

Peugeot 206 (1998-2012 / MK 1)
How to Replace the Fuel Filter in a Peugeot 206?
In this tutorial, you will learn how to replace the fuel filter in a Peugeot 206, a very simple and quick task. First, open the fuel tank cap to release the …Read all…
Posted on 20 September 2026 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to Replace the Fuel Filter of the Peugeot 206?
To replace the fuel filter of the Peugeot 206, access the underside of the vehicle near the left rear wheel: here you will find the fuel filter close to the …Read all…
Posted on 19 September 2026 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to Replace the Fuel Filter on a Peugeot 206?
In this tutorial, you will learn how to replace the fuel filter on a Peugeot 206, a very simple and quick operation. First, lift the right rear side of the …Read all…
Posted on 24 August 2026 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Replacing Fuel Filter on Peugeot 206
Want to replace the fuel filter on your Peugeot 206 yourself? Here's how to remove it. Lift the car on a column lift; using a screwdriver, remove the round …Read all…
Posted on 7 April 2026 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to Remove the Fuel Filter on a Peugeot 206
Let’s see how to remove the fuel filter on a Peugeot 206: lift the car using a column jack and locate the fuel filter (as shown in the video). Using a socket …Read all…
Posted on 30 March 2026 by ScegliAuto
Cigarette lighter (2) Airbag (9) Alternator (10) Speaker (5) Shocks (3) Antenna (5) Air conditioning (2) Car stereo (11) Anti-roll bar (2) Roof rack bars (1) Battery (17) Ignition coil (3) Air vents (4) Bushings (1) Control arm (2) Transmission (10) Spark plugs (7) Glow plugs (2) Convertible top (7) Carburetor (1) Body (8) Control unit (2) Key (26) Trunk lock (1) Timing belt (22) V-belt (6) Air conditioner (2) A/C controls (5) Onboard computer (10) Checks and maintenance (56) Dashboard (3) Shifter boot (2) Bearing (2) Brake rotors (2) Side marker light (1) Headlight (24) Tail light (6) Fog lights (6) Air filter (16) Cabin air filter (8) Fuel filter (5) Diesel fuel filter (11) Oil filter (9) Parking brake (3) Clutch (10) Grille (1) Fuel injectors (7) Reverse light switch (1) Accessory kit (1) Light bulb (7) Side marker bulb (1) Headlight bulb (24) Tail light bulb (12) Interior dome light bulb (6) Antifreeze coolant (2) Instrument panel light (15) License plate light (4) (1) Handle (1) Exhaust muffler (1) Trim cover (1) Engine (1) Power window motor (1) Starter motor (10) Transmission fluid (4) Brake fluid (1) Engine oil (9) Clock (17) Door trim panel (28) Front bumper (5) Rear bumper (4) Brake pads (4) Hydraulic pistons (1) Tires (2) Shift knob (14) Pump (8) Fuel pump (14) Car door (7) Push button (2) Power window switch (4) Instrument cluster (10) Radiator (6) Heater core (8) Wheel (4) Fuse box (58) Seat (14) Axle shaft (1) Crankshaft position sensor (1) Engine coolant temperature sensor (4) Parking sensors (1) Door lock (3) Brake system (1) Suspension system (3) Side mirror (16) Rearview mirror (3) Warning light – error code (16) Service warning light (38) Windshield wipers (3) Thermostat (2) Cylinder head (5) Tie rods (2) Center console tunnel (2) Valve (2) EGR valve (1) Blower motor (7) Side window (1) Steering wheel (6)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos