Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Rear light bulb

Peugeot 206 - Rear light bulb

Peugeot 206 (1998-2012 / MK 1)
How to replace the rear light bulbs in the Peugeot 206?
In this tutorial, we can see how to replace the rear light bulbs in the Peugeot 206, an extremely simple and quick operation. First of all, make sure that the …read all…
Posted on 4 October 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the rear light bulb of the Peugeot 206 SW?
In this new guide dedicated to all of you who own a Peugeot 206 Station Wagon, we will discover how to replace the rear headlight bulb completely …read all…
Posted on 26 August 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the rear light bulb on a Peugeot 206
Before starting, we will have to open the rear hatch of the luggage compartment of our Peugeot 206. So let's start by disengaging and removing the clips that …read all…
Posted on 18 January 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the rear light bulb on a Peugeot 206?
Before starting, we will have to open the tailgate of our Peugeot 206. So let's start by disengaging and removing the hooks that fix the side carpet of the …read all…
Posted on 16 January 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Replacement rear bulbs on Peugeot 206
Open the boot lid and with a small flat screwdriver remove the clip that secures the inner boot cover to the bodywork. Move the inner sheet so that you can …read all…
Posted on 3 January 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Replace the rear lights on Peugeot 206
Do we want to replace damaged bulbs on a Peugeot 206? Let's see how to remove the bulbs from inside the rear light. We open and lift the tailgate, remove the …read all…
Posted on 28 December 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the brake light on the Peugeot 206
In this simple operation it will obviously be necessary to open the trunk of the trunk in order to have access to the screws that secure the headlight. As a …read all…
Posted on 22 October 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Rear light bulb replacement
In order to replace the rear light bulb it is necessary to remove the light itself: then access the rear luggage rack, move the covering carpet in order to …read all…
Posted on 5 August 2023 by ScegliAuto
Cigarette Lighter (2) Airbags (6) Alternator (6) Loudspeaker (3) Shock absorbers (3) Antenna (2) Air conditioning (1) Car stereo (11) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Coil (3) Air Vents (4) Bushings (1) Arm (2) Gearbox (6) Spark plugs (7) Glow plugs (2) Soft top (4) Carburetor (1) Bodywork (1) Control unit (4) Key (16) Locking the trunk (1) Timing belt (17) V-belt (4) Air conditioning (1) Air conditioning controls (2) -board computer (10) Checks and maintenance (55) Dashboard (2) Bearing (2) Brake discs (2) Headlight (15) Tail light (5) Fog lights (4) Air filter (11) Cabin air filter (7) Petrol filter (5) Diesel filter (9) Oil filter (7) Hand brake (2) Clutch (5) Injectors (6) Reverse gear switch (1) Accessory Kit (1) Light bulb (7) Side turn signal light bulb (1) Headlight bulb (18) Rear light bulb (8) Interior lights ceiling light bulb (3) Antifreeze liquid (1) Dashboard light (14) License plate light (3) Third brake light (1) Muffler (1) Mask (1) Engine (1) Window motor (1) Starter motor (8) Gear oil (3) Engine oil (7) Door panel (23) Front bumper (3) Rear bumper (2) Brake pads (4) Tires (2) Gear Shift Knob (11) Pump (7) Fuel pump (13) Door (2) Push button (1) Window lift button (3) Instrument cluster (15) Radiator (5) Passenger compartment heating radiator (6) Wheel (4) Fuse box (34) Seat (9) Drive shaft (1) Crankshaft RPM sensor (1) Coolant temperature sensor (3) Lock (1) Lambda sensor (1) Suspensions (3) Outside rearview mirror (13) Interior rearview mirror (2) Windscreen wipers (1) Thermostat (2) Engine head (4) Steering rods (1) Central tunnel (1) Valve (1) EGR valve (1) Interior blower (5) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos