Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 206
  6. : Airbags

Peugeot 206 - Airbags

Peugeot 206 (1998-2012 / MK 1)
How to deactivate the passenger airbag on the Peugeot 206

When it comes to a Peugeot 206 vehicle, temporarily suspending the operation of the passenger side airbag is a simple and quick operation. To suspend the …read all…
Posted on 18 March 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to remove the airbag in the Peugeot 206

The procedure for removing the airbag in your Peugeot 206 is a very simple procedure. Before carrying out any other operation, it is essential to disconnect …read all…
Posted on 2 May 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Remove the steering wheel airbag of a Peugeot 206

In this very short video tutorial we can see how to remove the steering wheel airbag of a Peugeot 206, before starting this operation it is very important to …read all…
Posted on 13 April 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Remove steering wheel airbag on Peugeot 206

How to remove the steering wheel airbag of a Peugeot 206? Let's see how the airbag is removed from above the car's steering wheel. We disconnect the battery …read all…
Posted on 17 January 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Driver airbag removal instructions

Before proceeding with the disassembly of the driver's side airbag, it is advisable to disconnect the battery to prevent any fault warning lights from turning …read all…
Posted on 25 July 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to remove the airbag from the car

The following operation requires a good deal of patience. The first thing to do is to open the hood of your car and disconnect the negative pole of the battery …read all…
Posted on 25 July 2023 by ScegliAuto

Cigarette Lighter (2) Airbags (6) Alternator (6) Loudspeaker (3) Shock absorbers (3) Antenna (2) Air conditioning (1) Car stereo (11) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Coil (3) Air Vents (4) Bushings (1) Arm (2) Gearbox (6) Spark plugs (7) Glow plugs (2) Soft top (4) Carburetor (1) Bodywork (1) Control unit (4) Key (16) Locking the trunk (1) Timing belt (17) V-belt (4) Air conditioning (1) Air conditioning controls (2) -board computer (10) Checks and maintenance (55) Dashboard (2) Bearing (2) Brake discs (2) Headlight (15) Tail light (5) Fog lights (4) Air filter (11) Cabin air filter (7) Petrol filter (5) Diesel filter (9) Oil filter (7) Hand brake (2) Clutch (5) Injectors (6) Reverse gear switch (1) Accessory Kit (1) Light bulb (7) Side turn signal light bulb (1) Headlight bulb (18) Rear light bulb (8) Interior lights ceiling light bulb (3) Antifreeze liquid (1) Dashboard light (14) License plate light (3) Third brake light (1) Muffler (1) Mask (1) Engine (1) Window motor (1) Starter motor (8) Gear oil (3) Engine oil (7) Door panel (23) Front bumper (3) Rear bumper (2) Brake pads (4) Tires (2) Gear Shift Knob (11) Pump (7) Fuel pump (13) Door (2) Push button (1) Window lift button (3) Instrument cluster (15) Radiator (5) Passenger compartment heating radiator (6) Wheel (4) Fuse box (34) Seat (9) Drive shaft (1) Crankshaft RPM sensor (1) Coolant temperature sensor (3) Lock (1) Lambda sensor (1) Suspensions (3) Outside rearview mirror (13) Interior rearview mirror (2) Windscreen wipers (1) Thermostat (2) Engine head (4) Steering rods (1) Central tunnel (1) Valve (1) EGR valve (1) Interior blower (5) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos