Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Diesel filter

Peugeot 206 - Diesel filter

Peugeot 206 (1998-2012 / MK 1)
How to dismantle the fuel filter of the Peugeot 206 2.0 HDI.
Today's instructions will show us how to dismantle and replace the diesel fuel filter of the Peugeot 206 2.0 HDI, in simple steps. First, we open the car's …read all…
Posted on 1 December 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Replacing the diesel filter on Peugeut 206
How to replace the diesel filter on a Peugeot 206? We lift the hood covering the engine compartment and see how to do it. We remove the engine cover panel and …read all…
Posted on 4 February 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Replacement fuel filter on Peugeot 206
Open the tank lid and unscrew the cap underneath. Raise the car with a jack, although it would be better for this to be equipped with a lifting bridge. …read all…
Posted on 5 January 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to remove the filter on a Peugeot 206
How to replace the diesel filter placed in a Peugeot 206? Let's see in this video the replacement of the piece. We open the car door and pull up the engine …read all…
Posted on 22 November 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Diesel filter replacement instructions
Keeping the diesel filter clean and efficient is certainly essential to avoid dirtying the pump and injectors; replacing it is extremely simple: once the front …read all…
Posted on 11 September 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Instructions for bleeding the diesel filter
It may happen that air forms in the fuel supply system or that it settles on the bottom of the impurity filter: this translates in practice into an uncertainty …read all…
Posted on 20 August 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Diesel filter replacement instructions
The diesel fuel filter is of the cartridge type and is located in the front part of the engine: then open the hood, remove the plastic cover on the engine and …read all…
Posted on 16 August 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Instructions for bleeding the diesel filter
Open the front hood and remove the plastic cover on the engine: the diesel filter is located in the front part of the engine compartment, immediately behind …read all…
Posted on 7 August 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Diesel filter replacement instructions
In order to replace the diesel filter, first remove the plastic cover from the engine and intercept the filter located in the front part of the engine itself. …read all…
Posted on 23 July 2023 by ScegliAuto
Cigarette Lighter (2) Airbags (6) Alternator (6) Loudspeaker (3) Shock absorbers (3) Antenna (2) Air conditioning (1) Car stereo (11) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Coil (3) Air Vents (4) Bushings (1) Arm (2) Gearbox (6) Spark plugs (7) Glow plugs (2) Soft top (4) Carburetor (1) Bodywork (1) Control unit (4) Key (16) Locking the trunk (1) Timing belt (17) V-belt (4) Air conditioning (1) Air conditioning controls (2) -board computer (10) Checks and maintenance (55) Dashboard (2) Bearing (2) Brake discs (2) Headlight (15) Tail light (5) Fog lights (4) Air filter (11) Cabin air filter (7) Petrol filter (5) Diesel filter (9) Oil filter (7) Hand brake (2) Clutch (5) Injectors (6) Reverse gear switch (1) Accessory Kit (1) Light bulb (7) Side turn signal light bulb (1) Headlight bulb (18) Rear light bulb (8) Interior lights ceiling light bulb (3) Antifreeze liquid (1) Dashboard light (14) License plate light (3) Third brake light (1) Muffler (1) Mask (1) Engine (1) Window motor (1) Starter motor (8) Gear oil (3) Engine oil (7) Door panel (23) Front bumper (3) Rear bumper (2) Brake pads (4) Tires (2) Gear Shift Knob (11) Pump (7) Fuel pump (13) Door (2) Push button (1) Window lift button (3) Instrument cluster (15) Radiator (5) Passenger compartment heating radiator (6) Wheel (4) Fuse box (34) Seat (9) Drive shaft (1) Crankshaft RPM sensor (1) Coolant temperature sensor (3) Lock (1) Lambda sensor (1) Suspensions (3) Outside rearview mirror (13) Interior rearview mirror (2) Windscreen wipers (1) Thermostat (2) Engine head (4) Steering rods (1) Central tunnel (1) Valve (1) EGR valve (1) Interior blower (5) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos