Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cadillac
    3. :
  3. Xts
    4. : How to locate fuses and know their patterns in a 2019 Cadillac XTS

Cadillac Xts - Video tutorial

Model: Cadillac Xts MK 1 - Years 2013-2019
Operation: How to locate fuses and know their patterns in a 2019 Cadillac XTS

The first fuse panel of a 2019 Cadillac XTS car can be located inside the passenger compartment of the vehicle, located exactly on the driver's side, behind the dashboard located at the bottom left of the steering wheel. This first panel contains fuses assigned to: wireless module, USB socket, radio, display, instrument panel, HVAC, airbag, heated passenger seat, steering lock, front camera, etc. The next fuse panel is located at the right end inside the engine compartment and contains: transmission control module, front wipers, oxygen sensor, ignition coil, windows, panoramic roof, ABS pump, ABS valve, amplifier, high beams , low beam, fog lights, horn, air quality sensor, battery sensor, etc. Finally, inside the trunk we find the last panel and this contains: suspensions, rain sensor, light sensor, humidity sensor, assisted parking, etc.


Posted on 5 October 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos