Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Partner Tepee
    4. : 2008-2018 (B9)

Peugeot Partner Tepee Years 2008-2018 (B9)

Peugeot Partner Tepee (2008-2018 / B9)
How to set the tire pressure in the Peugeot Partner?
Today we deepen the topic of tires and specifically the anomaly warning light, present in the instrument cluster. It is yellow in color, has an exclamation …read all…
Posted on 15 May 2024 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How do you replace the rear headlight bulb of the Peugeot Partner?
The replacement of the rear headlight bulb of the Peugeot Partner is done by opening the rear tailgate of the vehicle, so that it is possible to access the …read all…
Posted on 10 May 2024 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How to reset the service in the Peugeot Partner van?
In this tutorial, we can see how to reset the service in the Peugeot Partner van, an extremely simple and quick operation, to be done only once all scheduled …read all…
Posted on 6 May 2024 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
Disassembly of the front door panel of the Peugeot Partner Tepee.
These instructions will allow us to disassemble and replace the front door panel of the Peugeot Partner Tepee. First, we open the front door and begin to …read all…
Posted on 4 May 2024 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How to reset the tire pressure light on the Peugeot Partner van?
In this tutorial, we can see how to reset the tire pressure light in the Peugeot Partner van, a very simple and quick operation to be carried out only after …read all…
Posted on 2 May 2024 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How to reset the service of the Peugeot Partner B9
In this video we can see how to reset the service of the Peugeot Partner B9: Make sure to have closed the driver's door and to have the ignition turned off. …read all…
Posted on 20 April 2024 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
Resetting the service light of the Peugeot Partner
When it is time to change the engine oil in the Peugeot Partner, an orange wrench symbol appears on the central display of the instrumentation. Once the change …read all…
Posted on 16 April 2024 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How to reset the tire pressure on a Peugeot Partner Tepee
Today we will see how to reset the tire pressure on a Peugeot Partner Tepee, model B9 produced from 2008 to 2018. First of all, we need to turn on the vehicle …read all…
Posted on 7 April 2024 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How to solve the problem of the Peugeot Partner heating system not working
In this video we see how to solve the problem of the heating of a Peugeot Partner that is not working. We see that the fan does not work at any speed. The …read all…
Posted on 23 March 2024 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
Disassembly of the particulate filter of the Peugeot Partner Tepee
Today's guide will show us how to disassemble and replace the particulate filter or DPF of the Peugeot Partner Tepee HDI, following the instructions below. …read all…
Posted on 14 March 2024 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
Resetting the service light of the Peugeot Partner B9.
In this video we see how the appearance of an orange icon in the shape of a wrench, on the display in the center of the instruments of the Peugeot Partner B9, …read all…
Posted on 2 March 2024 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
Replacement of the timing belt of the Peugeot Partner Tepee - Citroen Verlingo 1.6 HDi
Today's information will show us how to disassemble and replace the timing belt of the Peugeot Partner Tepee 1.6 HDi, as well as the Citroen Berlingo. First, …read all…
Posted on 18 February 2024 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How do you replace the timing belt of the Peugeot Partner?
In order to replace the timing belt of the Peugeot Partner, you need to loosen the screws that secure the right front wheel, also removing the corresponding …read all…
Posted on 2 February 2024 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
Where are the fuses located in the Peugeot Partner?
On the Peugeot Partner, the fuses are divided inside fuse boxes that are installed on the vehicle: in this car model, it is possible to identify two boxes. The …read all…
Posted on 30 December 2023 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How to replace the license plate light of the Peugeot Partner - Citroen Berlingo
Today's guide will show us how to disassemble and replace the license plate light bulb of the Peugeot Partner, as well as the Citroen Berlingo. First, we open …read all…
Posted on 17 December 2023 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
Where is the heating resistor located in the Peugeot Partner van?
In this video, we can see where the heating resistor is located in the Peugeot Partner van and how to proceed in case we need to replace it, which is a very …read all…
Posted on 24 November 2023 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
Where is the OBD port located on the Peugeot Partner?
If you own a 2018 Peugeot Partner and need to use a diagnostic tool to identify and resolve any errors in the control unit, then all you have to do is read the …read all…
Posted on 22 November 2023 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How to reset the tire pressure warning light on the Peugeot Partner van?
In this tutorial, we can see how to reset the tire warning light in the Peugeot Partner van, a very simple and quick operation. Before doing this, make sure to …read all…
Posted on 9 November 2023 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How to program the key for the Peugeot Partner Tepee?
Below we will see the steps that will allow us to program the key of the Peugeot Partner Tepee, using a diagnostic tool. First, we get into the car and start …read all…
Posted on 24 October 2023 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
Replace the headlight bulb of the Peugeot Partner 2019.
If the position light bulb of our Peugeot Partner were to burn out, we must replace it as soon as possible. To change it, we need to open the engine hood and …read all…
Posted on 20 September 2023 by ScegliAuto
Alternator (1) Car stereo (4) Battery (6) Glow plugs (1) Key (4) Timing belt (7) -board computer (2) Checks and maintenance (37) Dashboard (1) Tail light (1) Particulate filter (2) Air filter (4) Cabin air filter (4) Diesel filter (5) Clutch (1) Light bulb (4) Headlight bulb (2) Rear light bulb (5) License plate light (3) Engine (6) Starter motor (1) Gear oil (2) Engine oil (3) Door panel (7) Brake pads (2) Hydraulic pistons (1) Tires (4) Gear Shift Knob (2) Pump (1) Push button (1) Instrument cluster (11) Radiator (1) Fuse box (13) Seat (2) Coolant temperature sensor (1) Outside rearview mirror (1) Engine mount (1) Thermostat (2) Turbine (1)

See also:

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos